TEL+44 (20) 8969 1367
FAX+44 (20) 8968 8913

admin@kaloricheater.co.uk
31-33 Beethoven Street
London W10 4LJ UK

:: CATALOGUE CONTENTS
A1 compact portable
industrial fan heaters
A2 portable fan
assisted heaters
B1 4-20kW
unit heaters
B2 uht unit
heaters
C1 warm air curtains
and high level heaters
D1 mayfair
convectors
D2 forced air
consoles
D3 panel
heaters
E1 rectangular rod
type heater batteries
E2 circular rod
type heater batteries
E3 insertion
units
F1 control
panels
G1 tubular
heater units
H1 immersion
heater units
I1 electric
elements
J1 ATEX, EExd
fan assisted unit
J2 ATEX, EExd
convector heaters
J3 ATEX, EExd cabinet
convector heaters
K1 industrial finned
tubular heaters
L1 halogen
heaters
L2 ceramic
heaters
L3 weather resistant
halogen heaters
L4 halogen ceramic
and radiant heaters
M1 heating
cables
M2 heater
mats
M3 under laminate
elements
N ? other products
and enquiries
   

HOME |  PRODUCT CATALOGUE |  COMPANY PROFILE  |  ENQUIRIES

  
   

M1 | KCK – heating cables

APPLICATION

KCK kits are designed to heat stone or ceramic floors. They can be installed in a screed or directly into the tile adhesive. The kits are ideally suited to irregular shaped areas. In poorly insulated properties supplementary heating may be required.

FEATURES

An KCK kit includes heating cable, tape to hold the cable to the sub-floor and KDPT digital programmable thermostat

The 4mm diameter cable keeps the increase in floor height to a minimum

3m cold lead

As the cable is not fixed to a web it is easy to cope with irregular features such as bay windows and kitchen islands

SELECTION

Firstly, calculate the area of floor to be heated. This will be the total floor area minus the area occupied by fixtures such as cupboards, sinks, baths etc.

You will see that each KCK kit has a stated minimum and maximum floor surface area. The answer to your calculation will fall between the minimum and maximum areas of one of the ten kits - this is the kit for you.

If you are unsure of the exact area to be heated and your estimate falls close to the maximum area of one kit and the minimum area of another, we suggest you select the smaller of the two kits.

 
Specifications

List No. Output Area to Heat Length of Heating Coil Average Cable Spacing
kW m² m mm
KCK-1 0.12 1 11 90
KCK-2 0.2 2 19 100
KCK-3 0.4 3-4 37 80-100
KCK-5 0.6 5-6 64 80-100
KCK-7 0.75 7-8 76 80-100
KCK-9 0.95 9-10 87 80-100
KCK-11 1.3 11-13 131 80-100
KCK-14 1.7 14-17 159 80-100
KCK-18 2.0 18-20 194 80-100
KCK-21 2.6 21-26 2 x 131 80-100

 

Design, specification, prices, etc. subject to alteration without notice