D3 | panel heaters

Series Two Panel Heater

KALORIC are proud to introduce their series two range of panel convector heaters with integral electronic thermostats and suitable for a centralised control system. The heaters are slim, robust , easy to install whilst being simple and efficient in use.

CONSTRUCTION

Made from high quality steel finish is ivory coated in RAL9010 colour, the one piece mounting bracket is for wall fixing with the heater "dropped" into position and "locked" into place.

INSTALLATION

The heater is to be positioned to maintain the minimum distance of 0.15m to the finished floor and 0.1m to the sides and top. A lead of 400mm is supplied for connection to a suitable outlet.

CONTROL

The element is of a specially designed aluminum extrusion allowing the maximum air dissipation resulting in a superior convected air flow. The controls include an auto reset over heat cut-out and a neon to show when the heater is on. Located to the top right rear two rotary switches from the control, one offers on/off selection the other is graduated 1 to 9. This offers the selection of the ambient temperature. It also features a frost setting (°) providing a set back to 7°C. This rotary know has indexing pegs in it to permit the locking of the selected temperature range. A centralised time control programme to control up to 30 heaters using a pilot wire is offered as an optional extra (ref KP/2/TC).

Dimensions and Weights

FOR INSTALLED DEPTH (i.e., overall distance from wall) ADD 20mm
TYPICAL APPLICATIONS: Home, Office, Hotel rooms, etc.

Design, specification, prices, etc. subject to alteration without notice