TEL+44 (20) 8969 1367
FAX+44 (20) 8968 8913

admin@kaloricheater.co.uk
31-33 Beethoven Street
London W10 4LJ UK

:: CATALOGUE CONTENTS
A1 compact portable
industrial fan heaters
A2 portable fan
assisted heaters
B1 4-20kW
unit heaters
B2 uht unit
heaters
C1 warm air curtains
and high level heaters
D1 mayfair
convectors
D2 forced air
consoles
D3 panel
heaters
E1 rectangular rod
type heater batteries
E2 circular rod
type heater batteries
E3 insertion
units
F1 control
panels
G1 tubular
heater units
H1 immersion
heater units
I1 electric
elements
J1 ATEX, EExd
fan assisted unit
J2 ATEX, EExd
convector heaters
J3 ATEX, EExd cabinet
convector heaters
K1 industrial finned
tubular heaters
L1 halogen
heaters
L2 ceramic
heaters
L3 weather resistant
halogen heaters
L4 halogen ceramic
and radiant heaters
M1 heating
cables
M2 heater
mats
M3 under laminate
elements
N ? other products
and enquiries
   

HOME |  PRODUCT CATALOGUE |  COMPANY PROFILE  |  ENQUIRIES

  
   

D2 | forced air consoles


KCH Forced Air Console Unit Heater

APPLICATION

The KALORIC KCH Cabinet Unit Heater is a high capacity all electric fan convector type offering a wide variety of airflow, mounting and control features. Floor, walls or even ceiling mounted it can also be partially or fully recessed. Particularly well suited for the heating of lobbies, stairways, corridors, waiting rooms, passenger terminal areas and other public areas.

FEATURES OPTIONS

Heavy duty motor with built-in thermal overload protection

Finned Tubular elements

Auto reset high limit cut-outs

Tamperproof controls

Two speed motor (except on ceiling mounting)

Fan delay, on and off cycle

Maximum recommended mounting height 3m

Internally insulated for low surface temperature, Finish RAL 9001

Air intake filter

Trim bars for recessed units

Single and three phase units available

Can be supplied for surface, semi-recessed and fully re-cessed applications.

INSTALLATION

The unit can be floor, wall or ceiling mounted taking due consideration of the unit weight (43 to 60kg). The maximum recommended mounting height for ceiling units is 3 metres. Recessed units can be supplied with the trim bars for site fixing to the cabinet at the appropriate depth. The front panel is easily removed to provide access to the motor, elements and electrical compartment. Electrical connection through appropriate knockouts should be carried out by a qualified electrician to current regulations.

SELECTION

To specify exact requirements build up list numbers as example.

Dimensions and Weights

List
No.		 Voltage
and
Phase		 Heating
Capacity		 Output Air
Volume		 Noise
level		 Dimensions Weight
Total
kW		 Setting kW M3/hr dba L H D kg
KCH-6 230v 1ph 6 High 6 425 50 712 660 255 59
400v
3ph + N		 Low 3 380 48
KCH-8 400v
3ph + N		 8 High 8 850 50 1220 660 255 59
Low 4 760 48
KCH-10 400v
3ph + N		 10 High 10 850 50 1220 660 255 59
Low 5 760 48
KCH-12 400v
3ph + N		 12 High 12 850 50 1220 660 255 59
Low 6 760 48

 

  

Design, specification, prices, etc. subject to alteration without notice